caguns.net

Due to growing usage, our Advanced Search is now for registered members.
However, You can still browse for free!
Listing an item is easy and easy for people to find.

Register a free account today to become a member! Once signed in, you'll be able to participate and use features that aren't available to guests!

Sig P365 Picture Thread

Mine are fairly vanilla and I have a third on the way. These photos were taken some time ago. Since then I reinstalled the safety on my wife’s 380 P365 and she likes and uses the flat magazine floor plates.

Two of them are set up similar with a Shield RMSc, Streamlight TLR-6, and at least one 12rd magazine each. Once the third arrives I have a Holosun 407k I’m mounting to it.

For holsters I have a Crossbreed Xecutive AIWB (x2), a Vedder OWB for IDPA BUG, and a pocket carry Alabama Holster.

 
Last edited:
not exciting. this is an everyday CCW for me. so it's all about that. The safari land holster works well for me. the eps carry cause a low profile red dot makes sense to me and the XL grip
 

Attachments

  • IMG_4870.jpeg
    IMG_4870.jpeg
    107.7 KB · Views: 7
  • IMG_4871.jpeg
    IMG_4871.jpeg
    87.6 KB · Views: 7
Got this a couple of weeks ago. X Macro Comp with Holosun 407k and Streamlight TLR7X. 400 rounds through it, no issues with 147 handloads.
Any chance you compered it to the non comp version. There sem to be mixed feelings about how much of a difference it makes but people love it none the less. I have a p365 and have the x macro comp in jail. Im excited to compare.
 
For me the x macro was just a tad too long. Didn’t feel great carrying (I’m short). One session at range and yeah it shot better. The flat trigger was better for me and I was right off the bat better w it than my regular one that I practice with. But. Not comfortable. Just a little longer and I did t like it. So I sold it
 
Any chance you compered it to the non comp version. There sem to be mixed feelings about how much of a difference it makes but people love it none the less. I have a p365 and have the x macro comp in jail. Im excited to compare.
I did not. The gun just has ports at the end of the slide and the barrel is not ported. I have a G19.3 with a Radian Ramjet and it shoots a lot flatter than this gun. I also have a ported M&P Pro CORE 5" that the slide and barrel is ported and it shoot flatter. I also has the Apex trigger and it's the best striker gun I own. I bought this to replaced my Shield 1.0 which I hate and never carry.

I put 400 rounds through it and it shoot well. I wanted a carry with a red dot and light and this fits the bill.
 
Took a standard CA compliant 365 and turned into an xmacro "hybrid" (no straight trigger or extended slide release). Before anyone asks, no, I dont want to try the straight trigger. I prefer curved triggers.
20250127_144125.jpg
 
Took a standard CA compliant 365 and turned into an xmacro "hybrid" (no straight trigger or extended slide release). Before anyone asks, no, I dont want to try the straight trigger. I prefer curved triggers.
View attachment 32171
That's nice. So it's the x macro grip size with the shorter slide without the comp on the end. This sounds like the best of both worlds.
 
Been carrying the X Macro for about 4 months now. G19 and G26 hasnt been carried since. Love mines with the Mischief Machine module. Module was milled to accept the dumb mag disconnect as this one is CC’d. Holsters can be slightly modified to fit with a dremel..
 

Attachments

  • IMG_0316.jpeg
    IMG_0316.jpeg
    69.7 KB · Views: 5
  • IMG_0315.jpeg
    IMG_0315.jpeg
    51.9 KB · Views: 4
I have a couple standard P365s with laser engraved grip modules on both. Sig XL size on one and a GrayGuns standard size on the other. I prefer the standard size P365, it ousted my Shield Plus as my go to AIWB.
 

Attachments

  • IMG_3055.jpeg
    IMG_3055.jpeg
    95.8 KB · Views: 4
I'll post up my 365 once I install the new trigger FedEx is hopefully dropping off today, but I'm curious about those of you who CCW them. You have to report the serial for your CCW, but since the serial is on the FCU, you could theoretically turn the gun into any iteration of the 365 without having to re-qualify the gun, correct? I know some IAs differ on stuff like triggers, LCI, mag disconnect etc, but what is the consensus on changing frames and slides?
 
This is my personal experience. My gun was in a California grip module. So the armorer that inspected, my gun expected there to be a mag disconnect. I was using the SAS slide so there is no LCI. I had an aftermarket trigger so I had removed the mag disconnect. The armorer insisted I put the mag disconnect back in. “Because it came that way”. I asked about LCI out of curiosity and he said that slide never had one so I don’t expect one if I had the non-California grip module I think I would be OK without mag disconnect. Off roster CZ went through with no issues.
 
P365X with XMacro Wilson Combat grip module and radian afterburner barrel and comp, stock slide. Trigger is on order, because it's pretty turrible :)

Non CA grip module, CA slide (which I may have to put the LCI back in, but who knows).
 

Attachments

  • Photo Jan 30 2025, 11 53 34.jpg
    Photo Jan 30 2025, 11 53 34.jpg
    54.3 KB · Views: 3
  • Photo Jan 30 2025, 11 53 56.jpg
    Photo Jan 30 2025, 11 53 56.jpg
    32.8 KB · Views: 3
P365X with XMacro Wilson Combat grip module and radian afterburner barrel and comp, stock slide. Trigger is on order, because it's pretty turrible :)

Non CA grip module, CA slide (which I may have to put the LCI back in, but who knows).
Bruh, this sort of setup is what I’ve been drooling over lately. Is it worth it? I may need to add a 365 to the inventory
 
Back
Top Bottom