Glock plus Ruger = Gruger? Grock? Just kidding

[M_N04H]

Range Report: So, about 12 or 13, 10 round mags through the Glock 19 with the Ruger RXM slide. Remington 115 grain FMJ factory ammo.

at 7 Yards, Glock 19 with the Ruger RXM slide, shoots around 2" low; 2" below point of aim. This repeated when putting the factory Glock barrel into the Ruger RXM slide; Same results in terms of point of aim and point of impact.

Grouping/accuracy was very similar between the RXM slide and barrel and the RXM slide with the Glock factory barrel. No noticeable differences in accuracy or grouping. Very satisfactorygrouping/accuracy.

The interesting "thing" that occurred was with the RXM slide/barrel, the slide locked back 3 times with the last round still in the magazine. Glock factory 10 round mag; they were not failures to feed and it was not jammed. It just didn't "sense" the last round was in the magazine and the slide locked back as through the magazine was empty.

That did not repeat that with the Glock factory barrel in the RXM slide; but I did not shoot as many rounds/magazines through that combination, so that is not really a good comparison.

Here in a few weeks I"ll go put 500 or more rounds through it in a single session and get a little better feel for how it performs, and will shoot some different bullet weights and types through it to see if that changes the POA/POI.

Thanks. I just put together the same set up. Will try out soon.

 

[M_N04H]

Well. Nearly 400 rds and not a single jam. 115 and 124gr super vel and pmc.

I didn't have the issue of the slide locking back with the final round in the chamber still. Everything functioned correctly.

I should also mention I used the rxm slide with the oem Glock barrel and guide rod.

 

[Plenty_Pack_556]

Y'all know the PSA Dagger slides fit the G19G3? Also PSA Long Slide also fit G19G3 with the effect of making it a G19L?

 

[WojtekWeaponry]

Y'all know the PSA Dagger slides fit the G19G3? Also PSA Long Slide also fit G19G3 with the effect of making it a G19L?

The new full-size RXM has this characteristic as well.

 

[ef9boy88]

GLuger

 

[M_N04H]

Y'all know the PSA Dagger slides fit the G19G3? Also PSA Long Slide also fit G19G3 with the effect of making it a G19L?

I wanted an RXM. This is the best I can do at the moment.