P320 Tabbed Trigger from Grayguns

[weaverftw]

It does look nice, but they missed it on pricing for me. While it looks like a decent gun, it's not like it's hand fit. Considering that, it's hard to justify dropping an extra $1000 on that over something like a Prodigy

By every account I’ve ever heard/read the Prodigy is an absolute dog and I don’t think I’d ever waste money on one…

 

[ReaperCustom45]

By every account I’ve ever heard/read the Prodigy is an absolute dog and I don’t think I’d ever waste money on one…

My buddy has one, that's the only one I've had experience with, so sample size of one, but I've put a couple hundred rounds through it and my buddy has about 2k through it. My experience was quite good, buttery smooth slide, good trigger, accurate and zero reliability issues. I know they had some issues when they first released, but as far as I know those have been fixed long ago. For what they cost, you could easily upgrade the internals to EGW, get an aluminum grip, and a few other upgrades and still come out considerably cheaper than a basic stock Stacatto. Also, factory mags are quite reasonably priced for them, which is a big bonus.

 

[john_marsten_1873]

By every account I’ve ever heard/read the Prodigy is an absolute dog and I don’t think I’d ever waste money on one…

Stock Prodigy. But then they made some updates post 2022 (I think) that made it “okay” OTB.

Now, the aftermarket is so good that you can get it close to Staccato.

Even with just the EGW ignition and adding a Red Dirt trigger made a huge improvement for one of mine, and that was drop-in.

So it has a lower entry that at least works and you can easily upgrade over-time.

It’s the drop-in aftermarket parts that really set it apart so most folks can start with a lot of DIY before sending it to a 2011 smith for polishing and action tuning.

 

[packy14]

Tabbed triggers for P320 by Grayguns just released.

Agency Arms makes one as well but it’s not compatible with AXG grip modules as this one is.

Really, this is what SIG should’ve done, themselves.

P320 Adjustable Straight Tabbed Trigger Kit – Competition

Cut your P320 trigger pull to 4 lbs with the Grayguns P320 Tabbed Trigger Competition Kit. Tabbed trigger, competition sear, and springs. Lifetime warranty.

grayguns.com

P320 Adjustable Straight Tabbed Trigger

Looking for a P320 tab trigger? Grayguns delivers a precision locking trigger for the SIG Sauer P320. Fits all P320 variants. Lifetime warranty.

grayguns.com

Polishing a turd. Let the p320 die

 

[john_marsten_1873]

Polishing a turd. Let the p320 die

my turds still aren’t shiny enough.

 

[Gawernator]

I havent been keeping up - does this really address the suspected root causes for the discharges? i thought it was a seer thing separate from the trigger function

No, I don't see the point of it.

"The short answer is no – and we want to be upfront about that. Other striker-fired platforms developed tab-and-locking triggers specifically to pass the drop-safety testing required by those designs. The P320, however, is different.


SIG Sauer® engineered the P320 around a mass-balanced trigger, sear, and trigger bar, along with a safety cam surface on the trigger bar that actively helps prevent the sear from disengaging the striker during shock, impact, and rough handling. As a result, the P320 does not fire without the trigger being physically actuated."

 

[Gawernator]

Polishing a turd. Let the p320 die

Nearly 5 million units sold, you'll have to die mad about it. Retards said the same thing about the Beretta M9 and Glocks

 

[Gawernator]

this most recent one might interest you. I just wish sig would acknowledge that there's an issue so there can be an actual solution implemented. Like I own 2 320s and I just want to know what I can do to make them safe.

View attachment 187309

Send it to a lab so they can prove the gun is defective... oh wait, then they'd have to admit they fked up. I see it all the time when I teach motorcyclists, people's ego makes them blame the device instead of accepting responsibility for their mistake or lack of skill/talent.

https://navalsafetycommand.navy.mil/Portals/100/Documents/SA%2023-25%20M18%20Service%20Pistol%20Mishaps.pdf

 

[packy14]

Nearly 5 million units sold, you'll have to die mad about it. Retards said the same thing about the Beretta M9 and Glocks

Sure thing. How’s that resale on your turd? Hahahahhahaha

 

[packy14]

Nearly 5 million units sold, you'll have to die mad about it. Retards said the same thing about the Beretta M9 and Glocks

I had one and sold it as soon as it had the first trigger recall. Faulty design. I have two p365xl and two p226. Not a hater on the brand but a turd is a turd. It’s lost the trust of people.

 

[ReaperCustom45]

Sure thing. How’s that resale on your turd? Hahahahhahaha

Lol in the trash. I just sold an M18, with a Romeo X red dot and Magpul grip module for like $500. Hell of a deal for that guy, honestly if money wasn't a concern right now I would've kept the thing, those Magpul grips are game changers for the 320.

 

[john_marsten_1873]

I had one and sold it as soon as it had the first trigger recall. Faulty design. I have two p365xl and two p226. Not a hater on the brand but a turd is a turd. It’s lost the trust of people.

I have more expensive pistols but the P320 is still my preferred platform. It’s been great for me, so yeah, I’ll keep on polishing.

 

[Gawernator]

Lol in the trash. I just sold an M18, with a Romeo X red dot and Magpul grip module for like $500. Hell of a deal for that guy, honestly if money wasn't a concern right now I would've kept the thing, those Magpul grips are game changers for the 320.

Dang you should have sold me that

I did get brand new for like $660 though

 

[ReaperCustom45]

Dang you should have sold me that

I did get brand new for like $660 though

Lol, you missed out, had it posted in the classifieds for about a week.

 

[Gawernator]

Sure thing. How’s that resale on your turd? Hahahahhahaha

Idk, I don't intend to ever sell it since I now have a 1911, a M9, MK25 and a M18. Basically the entire American semi auto military issued handgun history more or less. A guy is currently asking $1500 for one on here lol. I mean if the gun is so bad why don't you stand in front of it during a trigger pull? An unreliable turd wouldn't even go off so you should be fine right? You're probably just mad some teenage girl with a M18 shoots better than you ever will in your life.

 

[Gawernator]

Lol, you missed out, had it posted in the classifieds for about a week.

Too busy investigating a homicide this week and getting insane beretta deals

 

[ReaperCustom45]

Too busy investigating a homicide this week and getting insane beretta deals

Well I think you made out pretty good if you scored a Beretta.

 

[Gawernator]

Well I think you made out pretty good if you scored a Beretta.

$449.99 new for a M9 after the $100 rebate. The local guy selling in Sacramento wants $850 with only one USED mag. Lmao what a retard.

 

[ReaperCustom45]

$449.99 new for a M9 after the $100 rebate. The local guy selling in Sacramento wants $850 with only one USED mag. Lmao what a retard.

I've got an M9a1 and love it. Next I'm looking for an Inox or Brigadier model. Can never have too many, they are sweet shooters.

 

[Gawernator]

I've got an M9a1 and love it. Next I'm looking for an Inox or Brigadier model. Can never have too many, they are sweet shooters.

my friend got an INOX California model the same day, he found the gunbroker deals. They are $699 right now, or $599 after cash rebate (or $200 beretta bucks) if you buy before May 15. Just sort by lowest price and you'll see it, SPI guns