18+ Content Warning

By clicking Enter, you confirm you are 18 years of age or older and agree to comply with all applicable local, state, and federal laws.

Notice: Any content or member activity - including anything you may buy, sell, transfer, or discuss - must comply with current and upcoming laws.

Members are encouraged to stay informed: California Firearm Laws: 2026 Outlook & 2025 Recap . Responsibility for compliance rests solely with the individual member.

What's new
  • Welcome

    Welcome to CAguns

    Join California’s gun owner community. Create a free account to join discussions and explore member features.

    Join freeLog in
Rost Martin R1MF comes to Califnoria

Synthetic Brake Parts grease for guns?

I have been using BG SS2000 grease in my AK, but oil in my AR and handguns.
 
I run Mobil 1 synthetic grease on select parts of my M1 and M1a's. Garand Gear recommends it and sells small vials but can just buy a tub as well. I also have Lubriplate.
 
OmOpLaTa said:
Why shouldn't I grease the buffer and buffer spring? I usually just put a small amount of grease on both. I saw the MidwayUSA guy do it.
Click to expand...
It collects dirt and has no other actual benefit.
The buffer and spring are very loose inside the buffer tube.
If you are trying to dampen the noise, it really does not do that very well.
A dry buffer and spring are better as you don't get greasy hands when you are working on the gun.
You need to embrace the sproing.
You only hear the sproing when the gun is empty.
The noise of firing masks the sproing during live fire.
In actual use, you will LEARN that the sproing means you need to reload.
 
Last edited:
OmOpLaTa said:
Why shouldn't I grease the buffer and buffer spring? I usually just put a small amount of grease on both. I saw the MidwayUSA guy do it.
Click to expand...
Because everyone acts like you gotta do it like the military does it which makes perfect sense because lord knows we are all gonna be charging through desert conditions doing "I'm up he sees me I'm down" and getting our guns caked full of sand and stuff while we eat cold MREs with little time to do weapons maintenance because we are so busy doing tier 1 operator stuff.

Grease that thing up to your heart's content. Ain't gonna hurt nuthin'.

Personally I give mine a light coat of CLP... cuz it's metal and I think everything that is metal should have some form of corrosion protection on it.
 
Doesn't seem bad. I've been experimenting with marine grease for kicks and giggles and so far so good.

A lot of firearms greases are actually just automotive greases so I don't see any reason why you can't use it other than reacting with polymers.
 
I wipe the buffer spring in a light coat of clp. I live at the beach and rust never sleeps. I don't lube the buffer, it's aluminum.
 
You must log in or register to reply here.
Back
Top Bottom