18+ Content Warning

By clicking Enter, you confirm you are 18 years of age or older and agree to comply with all applicable local, state, and federal laws.

Notice: Any content or member activity - including anything you may buy, sell, transfer, or discuss - must comply with current and upcoming laws.

Members are encouraged to stay informed: California Firearm Laws: 2026 Outlook & 2025 Recap . Responsibility for compliance rests solely with the individual member.

What's new
  • Welcome

    Welcome to CAguns

    Join California’s gun owner community. Create a free account to join discussions and explore member features.

    Join freeLog in
Rost Martin R1MF comes to Califnoria

Trijicon rcr issue

H

hakopb84

Member
Messages
26
Just bought the jacob grey twc hex that came with an rmr plate and tried to put an RCR red dot on it but the capstan screws that came with the rcr are thinner than the holes in the plate what can i do to fix this issue
 
you probably have 6x32 capstans trijicon also sells 6-40 capstans.

capstans are hard to find so probably best to order from trijicon or the like. altho if you can find them on mcmaster or what not might work granted that doesnt necessarily completely make sense as i think the primary difference is thread pitch not diameter

would check with Jacob Grey what size screw is supposed to fit
 
Thats what i thought at first and went on the trijicon website and ordered the variety pack for the 6-40 just gotta wait and see if its gonna work or not
 
hakopb84 said:
Thats what i thought at first and went on the trijicon website and ordered the variety pack for the 6-40 just gotta wait and see if its gonna work or not
Click to expand...
You could have also reached out directly to trijicon customer service. I needed longer screws for the American defense mfg absolute co witness mount. The correct thread that was included with the optic was only the short ones. They sent me longer ones for free.
 
yea (edit 4-40) capstans from Trijicon should fix this up, i had to order a set of screws to mount mine as well. Bummer they dont include all the screws when you but it.... should especially at that price point.
 
Last edited:
cfarr said:
yea 6-40 capstans from Trijicon should fix this up, i had to order a set of screws to mount mine as well. Bummer they dont include all the screws when you but it.... should especially at that price point.
Click to expand...
Reached out to jacob grey spoke with representative, the rcr will not fit the jacob grey and trijicon does not want to release a thicker screw to fit for now maybe in the near future….
 
and there's your answer....
 
hakopb84 said:
Reached out to jacob grey spoke with representative, the rcr will not fit the jacob grey and trijicon does not want to release a thicker screw to fit for now maybe in the near future….
Click to expand...
i was wrong on thread pitch and after digging i think it will work if you order this https://www.trijicon.com/products/details/ac32127 this kit comes with 4-40 screws and that's what you need for the jacob grey twc hex plate (trijicon made this for zev style glock footprints that use 4-40 screws), you wouldn't use this plate tho just the screws. maybe if you reach out to trijicon they will sell you the 4-40 screws only.
 
You must log in or register to reply here.
Back
Top Bottom