18+ Content Warning

By clicking Enter, you confirm you are 18 years of age or older and agree to comply with all applicable local, state, and federal laws.

Notice: Any content or member activity - including anything you may buy, sell, transfer, or discuss - must comply with current and upcoming laws.

Members are encouraged to stay informed: California Firearm Laws: 2026 Outlook & 2025 Recap . Responsibility for compliance rests solely with the individual member.

  • Welcome

    Welcome to CAguns

    Join California’s gun owner community. Create a free account to join discussions and explore member features.

Gear Pics Any Custom PEWs you got, would love to see them!

What's tactical?
There is one company in santa clarita if you want to drive and do a Drop off & Pick up routine. Advanced coating technologies, but I am only about 90% satisfied with their CrN coating.
Why only 90%? I’m in Santa Clarita and am thinking of DLC a few things
 
IMG_1186.webp
Front: custom built on 9mm STI 2011 frame, tri-topped slide. Whoever did the cerakote did a 💩ty job and it’s flaking off of the rail. I am either going to have a high-polish DLC finish if it’s stainless or case-colored hardened if it’s carbon steel

Middle: Springfield Prodigy I sent to Limcat for a total rebuild as a Wildcat Tracker. I am swapping in an RMR HD for the optic

Rear: Early 90’s Limcat built by Johnny himself. It’s a Tripp Research frame and grip, Accurails, Caspian Slide, Limcat island barrel in 9 major with 3 poppels and a 5 port comp
 
9mm Full House Customs. 6” Stainless and 5” Half Rail built by Will O’Hara. Only factory item is the Springfield frame on each. The Full Rail was built by me when I used to do machine work.
 

Attachments

  • IMG_9739.webp
    IMG_9739.webp
    119.4 KB · Views: 60
  • IMG_9734.webp
    IMG_9734.webp
    120.3 KB · Views: 45
  • IMG_9732.webp
    IMG_9732.webp
    130.2 KB · Views: 59
Does a QVO 80’s pattern sling on a Q Mini Fix .300BO bolt action pistol count as ‘custom’? Haha!!

IMG_5166.webp
 
Here are 3 of my custom builds. Also have an Atlas Athena but don't consider it a custom.

Wilson Combat customized 92 Centurion
TTI CombatMaster G34
Stealth Platypus Commander (Deadpool build}
 

Attachments

  • 1000002812.webp
    1000002812.webp
    61.6 KB · Views: 50
  • 1000002813.webp
    1000002813.webp
    60.1 KB · Views: 47
  • 1000002814.webp
    1000002814.webp
    65.8 KB · Views: 61
Last edited:
These aren’t crazy builds but they’re my builds 🥲
 

Attachments

  • IMG_3139.webp
    IMG_3139.webp
    25.5 KB · Views: 57
  • IMG_1878.webp
    IMG_1878.webp
    95.5 KB · Views: 48
  • IMG_1746.webp
    IMG_1746.webp
    52.6 KB · Views: 44
  • IMG_2307.webp
    IMG_2307.webp
    51.3 KB · Views: 60
Here are 3 of my custom builds. Also have an Atlas Athena but don't consider it a custom.

Wilson Combat customized 92 Centurion
TTI CombatMaster G34
Stealth Platypus Commander (Deadpool build
So how flat is your atlas with its buttery smooth slide to frame fit? 😁💪🫡✌️
 
So how flat is your atlas with its buttery smooth slide to frame fit? 😁💪🫡✌️
Smooth and flat shooting with Blazer or PMC 124 gr ammo. Tried 150 gr Syntechs but prefer how the 124 gr feels plus had a few misfeeds with the flat nosed 150s.
Might try some 147 gr SuperVels.
 
Smooth and flat shooting with Blazer or PMC 124 gr ammo. Tried 150 gr Syntechs but prefer how the 124 gr feels plus had a few misfeeds with the flat nosed 150s.
Might try some 147 gr SuperVels.
How about the common 115gr? Usually the go to rounds for most guys
 
How about the common 115gr? Usually the go to rounds for most guys
115 gr ammo is perfectly fine but i prefer how the 124 gr feels in the Atlas. The Blazer and PMC 124 feels just slightly better. Also tried the New Republic USA 124 which is similar {if not the same} to the Blazers. Also depends on how the gun is sprung. Atlas runs 19 lb mainspring and 9 lb recoil.
 
Back
Top Bottom