Gear Pics Any Custom PEWs you got, would love to see them!

[Shellbackitup]

Here's my offering:

Who doesn't love to shoot a Cajunized CZ?

1) CZ 97B Fully Cajunized with flat face trigger, milled/lightened slide, K cut and Primary Arms ACSS reticle Holosun, Chrome Upper with DLC everywhere else. All work by CGW. This was supposed to just be a spare slide, but the 'broken' gun I bought only needed a new safety.
2) CZ 97B Fully Cajunized with Master Blue polish by Ford Customs out of FL. My only safe queen that hasn't been shot since the polish job, mainly because her reset is so short most people will accidently double tap, and well, she's so darn pretty.
3) CZ 75B Fully Cajunized with Accurized barrel bushing, plus spare Cajunized/Accurized slide with K-cut and Primary Arms ACSS reticle Holosun. My favorite gun to shoot, especially with irons.

And one of my Chief AJ's:

4) Chief AJ Tuned Ruger Mini-30 with custom carved stock by Otto Ritt in '93 (now in a legal config with no flash hider)

 

[RedHemi]

Here's my offering:

Who doesn't love to shoot a Cajunized CZ?

1) CZ 97B Fully Cajunized with flat face trigger, milled/lightened slide, K cut and Primary Arms ACSS reticle Holosun, Chrome Upper with DLC everywhere else. All work by CGW. This was supposed to just be a spare slide, but the 'broken' gun I bought only needed a new safety.
2) CZ 97B Fully Cajunized with Master Blue polish by Ford Customs out of FL. My only safe queen that hasn't been shot since the polish job, mainly because her reset is so short most people will accidently double tap, and well, she's so darn pretty.
3) CZ 75B Fully Cajunized with Accurized barrel bushing, plus spare Cajunized/Accurized slide with K-cut and Primary Arms ACSS reticle Holosun. My favorite gun to shoot, especially with irons.

And one of my Chief AJ's:

4) Chief AJ Tuned Ruger Mini-30 with custom carved stock by Otto Ritt in '93 (now in a legal config with no flash hider)

Love the CZs. Nice job

 

[dccgun2000]

These are some of my Modified PEWs, 2 of them are still not finished but once it's done it would look somewhat similar to the Blue Desert Eagle. Would love to see what you guys got!

Yeah, those look really small. Makes me wanna think about doing similar stuff to mine.

 

[sonofeugene]

My father made this after he returned from WWII.

 

[Skilly]

MR920 update. Same company that did the DLC Bronze for TTI

 

[ChallengerScatPackClub]

S&W 36-10. She just came back today from Wright Armory for a complete inside and out NT7 coating. I did ask them to leave the trigger and hammer in stock case hardened finish. She use to have very beautiful bluing. But carrying everyday for two years that bluing did not hold up too well, certain areas were light brown and some areas had some rust. I now see why people say modern S&W quality is not as good as back then. I have seen many older S&W revolvers bluing wear very nice and beautifully. Process took about 13 weeks. I love the look of bluing but I also love this satin finish. I also love the feel. The blasting and coating makes it more grippy than the slippery blue finish. Prior to the work I already had approximately 500 rounds through her. So she was already broken in and smooth but the internal coating made her even more smooth. Wright informed there was a few small parts like pins that they were unable to coat due to potentially ruining the tolerances. Appreciate them going over small details like this. A bit more expensive than other alternatives but worth it. Wright did an amazing and beautiful job. I can tell they really took the time to ensure the work was done with care and attention to detail. Definitely recommended if anyone needed some refinishing done. Also replaced the stock grips which the clear coat was chipping off with some Altamont Super Walnut Service Grips.

 

[Blade]

I panic bought this Glock in November and it was my very first gun. I just recently got the frame stippled it’s no rocketcity job but it’ll do. Now it’s complete, on to the next

 

[NorCALSpeed]

I panic bought this Glock in November and it was my very first gun. I just recently got the frame stippled it’s no rocketcity job but it’ll do. Now it’s complete, on to the next

Whoa you went all out on the first one. Cool! Welcome to the party.

 

[Skilly]

just received my custom Echelon back - 4.0 Comp with DLC Barrel coating and Grey DLC slide with window cuts - Precision Weapons Innovation in H Beach. Man these things shoot flat.

 

[davethebull]

8.6 blackout pistol
12.5” CMMG Upper Aero M5 Lower
AR Maglock for CA Compliance

 

[shooterMcGavin]

Finally got this one done

 

[davethebull]

43x COA C-Cut

 

[selfgawd]

Here’s my contribution.

 

[freedomtire]

Here's my favorite mile gun and shotgun:

 

[Skilly]

going for a shakedown tomorrow after a few changes.

 

[Plenty_Pack_556]

This thread turned from flamboyantly customized guns to just customized guns.

If you go back, davethebull is the one that made this thread go from that to this lol.

 

[davethebull]

This thread turned from flamboyantly customized guns to just customized guns.

If you go back, davethebull is the one that made this thread go from that to this lol.

My bad

 

[sonofeugene]

What is a mile gun?

 

[Gryff]

 

[selfgawd]

I panic bought this Glock in November and it was my very first gun. I just recently got the frame stippled it’s no rocketcity job but it’ll do. Now it’s complete, on to the next

This is nice. You shooting this tomorrow since the 2.0 is down?