18+ Content Warning

By clicking Enter, you confirm you are 18 years of age or older and agree to comply with all applicable local, state, and federal laws.

Notice: Any content or member activity - including anything you may buy, sell, transfer, or discuss - must comply with current and upcoming laws.

Members are encouraged to stay informed: California Firearm Laws: 2026 Outlook & 2025 Recap . Responsibility for compliance rests solely with the individual member.

What's new
  • Welcome

    Welcome to CAguns

    Join California’s gun owner community. Create a free account to join discussions and explore member features.

    Join freeLog in
Rost Martin R1MF comes to Califnoria

What hammer fired handgun would you buy for around $1,000

C

CA2ALOL

⚠️ New Member | No Deposits ☢️
Messages
9
Getting back in to hand guns after mostly shooting my ARs for the last year. I own only striker fired handguns at the moment and want something else for a change. My only experience with hammer fired guns are when I was younger shooting my Dad's 1911. I'd love a kimber 2k11 but I don't want to spend the nearly 3k take home price. What are your guys suggestions for something around $1k?
 
I just got a p226 and it is very nice but a bit annoying because you cant cut the California slides for an optic so if you want that you have to buy a precut slide and barrel. Beretta 92 also has the same issue with being hard to cut for an optic but it is possible it's just expensive. The Cz SPO1 is about 10oz heavier with a steel vs aluminum frame and has a bit better aftermarket support for triggers and grips and magwells. You can also convert it to single action vs da/sa. The only other hammer fired stuff around 1k would be 9mm 1911s which could also be cool but I would lean towards the first two. Sp01 is the best shooter of all of these
 
RustVendor said:
I just got a p226 and it is very nice but a bit annoying because you cant cut the California slides for an optic so if you want that you have to buy a precut slide and barrel. Beretta 92 also has the same issue with being hard to cut for an optic but it is possible it's just expensive. The Cz SPO1 is about 10oz heavier with a steel vs aluminum frame and has a bit better aftermarket support for triggers and grips and magwells. You can also convert it to single action vs da/sa. The only other hammer fired stuff around 1k would be 9mm 1911s which could also be cool but I would lean towards the first two. Sp01 is the best shooter of all of these
Click to expand...
good point I forgot to mention I would want a dot on it. I'm not really concerned about cowitnessing with irons since it will just be a range toy
 
CA2ALOL said:
good point I forgot to mention I would want a dot on it. I'm not really concerned about cowitnessing with irons since it will just be a range toy
Click to expand...
A cz is a decent option then, if you are ok with running the DPP footprint which would be a delta point pro or vortex XL/ST you can get it cut by vigilante arms for under 200. If you want other optics like RMR its trickier because it needs a plate due to the width of the slide which adds some cost. The CZ 75s are also great, the SPO1 essentially just has a heavier rail which adds weight.
 
Dot capable hammer fired for around $1k might take some time to find. If you can find a good deal on a PX4 & then have it milled... probably your best bet.
 
No_glonks said:
Find me one for around $1k and I’ll get it :)
Click to expand...
I did actually write to Sig a few months ago asking why they keep putting the LCI on the top of the slide which requires a different barrel vs on the extractor, I also offered to help them bring the 226x here . They never wrote back though
 
$1k Out the door brand new from a dealer? 92FS or a PX4 since Beretta is having their $100 rebate promo going on. But like others have mentioned it's kind of annoying / expensive to get them milled though.
 
RustVendor said:
A cz is a decent option then, if you are ok with running the DPP footprint which would be a delta point pro or vortex XL/ST you can get it cut by vigilante arms for under 200. If you want other optics like RMR its trickier because it needs a plate due to the width of the slide which adds some cost. The CZ 75s are also great, the SPO1 essentially just has a heavier rail which adds weight.
Click to expand...
Nate Wager does an amazing job milling slides.

Home - Wager Machine Works

CURRENT TURNAROUND TIMES: Optic cuts with cerakote/cold blue we are running 3-5 business day turnarounds.
wagermachineworks.com wagermachineworks.com
 
decius_mus said:
$1k Out the door brand new from a dealer? 92FS or a PX4 since Beretta is having their $100 rebate promo going on. But like others have mentioned it's kind of annoying / expensive to get them milled though.
Click to expand...
92FS probably the worst option considering the expense and jankiness with milling for a red dot. He’s gonna be well over a grand all in

Cheapest and best way is to probably pickup a used p226 for like $600 and buy an optic ready slide
 
You must log in or register to reply here.
Back
Top Bottom