What was your last Gun Purchase of 2024

[Knappsak08]

Tisas 38 super/ 9mm. 45acp is next

 

[Malibu]

Post up what you think of the Python once you have it in hand.

I know your inquiry was directed to the other member, but if you are interested in the Colt Python 2020 models (I have 3” and 4” versions), and have used both in several revolver oriented classes and events, and after such settled on what adjustments/improvements those models need IMO to be best suited, let me know.

 

[geoint]

Benelli M4

 

[Call_me_Tom]

I know your inquiry was directed to the other member, but if you are interested in the Colt Python 2020 models (I have 3” and 4” versions), and have used both in several revolver oriented classes and events, and after such settled on what adjustments/improvements those models need IMO to be best suited, let me know.
View attachment 32232

Yes of course I’d be interested in your thoughts.

 

[Malibu]

Yes of course I’d be interested in your thoughts.

Some of what I have learned after lots of shooting, etc:

* Sights: the stock Colt are trash. They drift. Get the Wilson set, as are on the 3” as pictured.
Rear: https://wilsoncombat.com/rear-sight...stable-serrated-blade-square-notch-black.html
Front: https://wilsoncombat.com/front-sight-colt-python-anaconda-snag-free-green-fiber-optic-180.html
(I think they also offer a gold bead as well)

* Trigger serrations: What idiot engineer ever puts those on a double-action revolver? On the 2020 Python (and Anaconda) they will make quick work of tearing up your finger when shooting any useful amount of double action. The fix it to have a gunsmith (not a butcher) smooth the face of the trigger, so as to make rolling the trigger much better.

* Sear engagement: When using the single action trigger mode, first the hammer, and very carefully apply pressure to the trigger while closely looking at the hammer; you will notice that the hammer actually moves slightly BACK before releasing. This is worse on some more than others. In this regard, the 2020 Python is inferior to just about any S&W. Your gunsmith should correct this. I wish Colt would have done it at the factory. The double-action pull is actually decent as new (at least the dozen+ that I have handled were).

*Cylinder chamfering for loading: The chamber mouths need to be slightly chamfered for rapidly inserting ammunition from speed loaders, etc. As from the factory, they are much too sharp. I had our gunsmith address this, and the outside of the front of the cylinder as well, to facilitate smoother insertion back into holsters.

*Stocks: on the left-side stock, (as supplied by Altamont) are IMO not relieved enough to clear some speed loaders. I found this to be the case with the Safariland Comp 2 variant, as getting the loader lined up straight enough to load rapidly (particularly with magnum-length ammunition) was problematic. The solution was easy: very carefully after removing the stocks, I used a Dremel tool to trim down the left stock enough in order to create a straight angle of approach for the loader. That solved the issue.

If all of the above sounds like a bit much (it is), one can certainly live with the 2020 Python as it comes from the factory; however, if you are into using revolvers for fast, accurate shooting, and want to be efficient at reloading, etc., you will find that the simple fixes above will make the revolver much better. I had shot an earlier Colt Python for years, and it had been back to Colt at least once while I owned it, for timing issues. The previous owner used it for PPC matches and fired many thousands of rounds in doing so. The new 2020 version is from what I hear from dedicated revolver shooters to be a much superior weapon in terms of strength and longevity. This is primarily to a better, redesigned lockwork and beefed up frame. That is a good thing.

 

[DasTwit]

Brno mod 5 from Royal Tigger, bought on Dec 24th and I should be getting it out of jail next week.

 

[Call_me_Tom]

Some of what I have learned after lots of shooting, etc:

* Sights: the stock Colt are trash. They drift. Get the Wilson set, as are on the 3” as pictured.
Rear: https://wilsoncombat.com/rear-sight...stable-serrated-blade-square-notch-black.html
Front: https://wilsoncombat.com/front-sight-colt-python-anaconda-snag-free-green-fiber-optic-180.html
(I think they also offer a gold bead as well)

* Trigger serrations: What idiot engineer ever puts those on a double-action revolver? On the 2020 Python (and Anaconda) they will make quick work of tearing up your finger when shooting any useful amount of double action. The fix it to have a gunsmith (not a butcher) smooth the face of the trigger, so as to make rolling the trigger much better.

* Sear engagement: When using the single action trigger mode, first the hammer, and very carefully apply pressure to the trigger while closely looking at the hammer; you will notice that the hammer actually moves slightly BACK before releasing. This is worse on some more than others. In this regard, the 2020 Python is inferior to just about any S&W. Your gunsmith should correct this. I wish Colt would have done it at the factory. The double-action pull is actually decent as new (at least the dozen+ that I have handled were).

*Cylinder chamfering for loading: The chamber mouths need to be slightly chamfered for rapidly inserting ammunition from speed loaders, etc. As from the factory, they are much too sharp. I had our gunsmith address this, and the outside of the front of the cylinder as well, to facilitate smoother insertion back into holsters.

*Stocks: on the left-side stock, (as supplied by Altamont) are IMO not relieved enough to clear some speed loaders. I found this to be the case with the Safariland Comp 2 variant, as getting the loader lined up straight enough to load rapidly (particularly with magnum-length ammunition) was problematic. The solution was easy: very carefully after removing the stocks, I used a Dremel tool to trim down the left stock enough in order to create a straight angle of approach for the loader. That solved the issue.

If all of the above sounds like a bit much (it is), one can certainly live with the 2020 Python as it comes from the factory; however, if you are into using revolvers for fast, accurate shooting, and want to be efficient at reloading, etc., you will find that the simple fixes above will make the revolver much better. I had shot an earlier Colt Python for years, and it had been back to Colt at least once while I owned it, for timing issues. The previous owner used it for PPC matches and fired many thousands of rounds in doing so. The new 2020 version is from what I hear from dedicated revolver shooters to be a much superior weapon in terms of strength and longevity. This is primarily to a better, redesigned lockwork and beefed up frame. That is a good thing.

Thank you for the details, it’s helpful! Who did you use for your gunsmith?

 

[Malibu]

Thank you for the details, it’s helpful! Who did you use for your gunsmith?

Dave Fink, the resident gunsmith at Gunsite.
I usually bring gun projects along when I take classes, so I can meet with him to go over specifics.

 

[Call_me_Tom]

Dave Fink, the resident gunsmith at Gunsite.
I usually bring gun projects along when I take classes, so I can meet with him to go over specifics.

That’s in Prescott AZ?

 

[oneaudiopro]

C series Browning Hi-Power.

 

[Malibu]

That’s in Prescott AZ?

Paulden, which is a short drive (27 miles) north of Prescott.

 

[drums_and_guns]

P2000sk .40 with 5 mags
Ruger Black Hawk .357
Mossberg 500 12 gauge
Mossberg 500C (20 gauge)

All of these 2024 purchases were PPT's for great deals and lightly used. Was glad to avoid sales tax and CA excise tax.

 

[Malibu]

Ruger Black Hawk .357

Did the Ruger Blackhawk include a 9mm fitted cylinder as well?

 

[drums_and_guns]

Did the Ruger Blackhawk include a 9mm fitted cylinder as well?

Unfortunately not. It was sold for $500, no case or anything. Picked it up from my friends grandpa who had barely used it.

 

[Malibu]

Unfortunately not. It was sold for $500, no case or anything. Picked it up from my friends grandpa who had barely used it.

Sounds nice, and a good deal. Those are very robust, strong revolvers that with proper care will last. Mine came with the extra 9mm cylinder, and is helpful as a teaching tool. You did good!

 

[drums_and_guns]

Sounds nice, and a good deal. Those are very robust, strong revolvers that with proper care will last. Mine came with the extra 9mm cylinder, and is helpful as a teaching tool. You did good!

That's pretty cool. Sounds fun; shooting 9mm out of a single action like that. Thanks for the head up!

 

[ef9boy88]

Aero Solus that I bought on Black Friday only to receive last week........ Also received several emails from them telling me it had gone on sale for less than I paid on Black Friday. Won't buy another one of their products ever again. Only reason I'm keeping this one is because when I tried to cancel the order I never got a response.

 

[Rickvs]

S&W Model 29-3 4" barrel

 

[2ndAmenEnjoyer]

Glock 34, bought it 2 weeks before the infringement tax. After that I have never bought anything else. Aside from ammo with my FFL03 + COE.

 

[BunnySloper]

Springfield Hellcat OSP.