CZ…when!?!?

[Wolkenflieger]

Yeah Drew quoted me even less to mill my slide and only cerakote the milled part (or no cerakote at all if his test confirmed my slide was stainless); he was also very accommodating to all my questions and random requests.


Eh she’s alright, she encourages all my car and gun shenanigans and you can take precautions. I prefer companionship and locking a good one down seemed reasonable to me

One can have companionship without signing a bad contract. There's no more common-law marriage in CA so that helps.

It's not the good things that one must think about but how bad it could get in a divorce. It's like motorcycle riding; dress for the crash, not just the ride.

 

[21SF 2.0]

I love my TS2 Orange. You love the DWXc so you'd probably like it too.

Yeesh, 60k on a wedding? You couldn't pay me to marry

Probably the biggest risk to reward with no reward lol
Dumb

 

[Gawernator]

Yeah Drew quoted me even less to mill my slide and only cerakote the milled part (or no cerakote at all if his test confirmed my slide was stainless); he was also very accommodating to all my questions and random requests.


Eh she’s alright, she encourages all my car and gun shenanigans and you can take precautions. I prefer companionship and locking a good one down seemed reasonable to me

I’m married to a Colombian lol it is what it is

 

[NorCALSpeed]

My wife and I got a prenup after listening to a few podcasts about divorce. It was her idea, lol. Happy we did it. You're basically protecting yourself from the state and various lawyers extracting fees.

 

[CZSoCal]

Just to chime in on my own CZ custom work timeframes and prices for the benefit of anyone in this thread.

I own 2 75 BD’s, 2 97B’s and a Shadow 2 SAO. I also sent out my FIL’s SP-01, which I shoot from time to time.

I have had work done by CGW, CZ Custom, Springer Precision and Vigilante Machine.

My most recent work was Vigilante Machine. I had Drew cut the slide on my S2, cerkote the cut area, remove the front sight and add a filler. From the day I shipped to the day it was at my door was 22 days. Total cost from him was $200. I would definitely do more business with him, but I’m fresh out CZ’s needing optic cuts! Pic of that below.

Springer Precision cut one of BD’s for a 508T and it was also fast and very reasonable priced, $187, if I recall correctly. However they no longer are accepting custom work, their site states they’re ramping up part production…

CGW optic cut my first BD and my FIL’s SP-01, also added barrel bushing to the SP. Turn around for the SP was shorter than expected, they quoted 12 weeks but it took 28 days. The BD took over 2 months.
I’ve had no issues with the work, and I appreciate their customer support. They actually answer the phone.
The SP total was $400
The BD total was $285
The plate needed for the optic added $75 to each cut cost.

CZ Custom optic cut one of 97’s and added their ACCU bushing. That experience was a total “black bag.” I had to work to get any response that they had my CZ and it was being worked. Didn’t even get a return tracking number, it just showed up. Work was flawless, customer support non-existent.
97 total was $600

For any future optic cuts, I go Vigilante all day. For any gunsmithing, I’d go CGW over CZC. Their work is worth the wait, IMO.

 

[weaverftw]

Just to chime in on my own CZ custom work timeframes and prices for the benefit of anyone in this thread.

I own 2 75 BD’s, 2 97B’s and a Shadow 2 SAO. I also sent out my FIL’s SP-01, which I shoot from time to time.

I have had work done by CGW, CZ Custom, Springer Precision and Vigilante Machine.

My most recent work was Vigilante Machine. I had Drew cut the slide on my S2, cerkote the cut area, remove the front sight and add a filler. From the day I shipped to the day it was at my door was 22 days. Total cost from him was $200. I would definitely do more business with him, but I’m fresh out CZ’s needing optic cuts! Pic of that below.

Springer Precision cut one of BD’s for a 508T and it was also fast and very reasonable priced, $187, if I recall correctly. However they no longer are accepting custom work, their site states they’re ramping up part production…

CGW optic cut my first BD and my FIL’s SP-01, also added barrel bushing to the SP. Turn around for the SP was shorter than expected, they quoted 12 weeks but it took 28 days. The BD took over 2 months.
I’ve had no issues with the work, and I appreciate their customer support. They actually answer the phone.
The SP total was $400
The BD total was $285
The plate needed for the optic added $75 to each cut cost.

CZ Custom optic cut one of 97’s and added their ACCU bushing. That experience was a total “black bag.” I had to work to get any response that they had my CZ and it was being worked. Didn’t even get a return tracking number, it just showed up. Work was flawless, customer support non-existent.
97 total was $600

For any future optic cuts, I go Vigilante all day. For any gunsmithing, I’d go CGW over CZC. Their work is worth the wait, IMO.

This is great feedback. I did a lot of research and decided to use Drew at Vigilante after talking to him on the phone. I’m be sending my SP-01 and my DWXc to him soon